17 OCT 2024 - Welcome Back to TorrentFunk! Get your pirate hat back out. Streaming is dying and torrents are the new trend. Account Registration works again and so do Torrent Uploads. We invite you all to start uploading torrents again!
Year of issue: 2019
Version: 2.16
Platform: Windows NT/2000/XP/2003/7
System requirements: 64Mb RAM (normal load), 384Mb RAM (WIM load)
Interface language: Multilanguage
Tablet: Not required
Description: The drive contains pre-installed WinPE 1.6 (Windows Server 2003 SP1) and WinPE 3.1x86 (Windows 7 SP1) environments with shared software block.
The main purpose of the disk is to scan the system for viruses, work with the file system FAT, NTFS, ExFAT, Ext2/Ext3 (read/write) and many others to read, change disk partitions, restore data, recover or change access passwords to Windows NT/2000/XP/2003 (for Vista, 7, Server 2008, Server 2012 support partial), backup data, save data over the network from non-booting systems, etc.
WinPE 1.6
- Standard Explorer (XPE) and BsExplorer for ERD Commander are used as shells.
- Loader performs HAL and core autodetection
- There is an additional loader with SCSI/RAID controller autodetection, a faster option and less memory intensive
- Full WIM download capability is determined automatically depending on memory size and Programs.wim file size.
- Once the drive is loaded, you can specify the network settings
- When installed on USB/HDD, Programs.wim is not searched for
- Installation on USB/HDD during WIM boot is possible only when the media is present and is performed by starting the PEInstaller shortcut from the root of the media.
- Allows custom drivers to be installed, just place them in the root directory of PeDrivers on any medium
- User-drivers are installed automatically when wim-booting, normal booting and memory capacity exceeds 256MB, as well as booting from a USB drive or hard drive.
- When booting, you search for and connect the Programs.wim image from the last logical disk on which the image was found. For network boot, the search is performed on network drives for normal and DHCP server for wim. It also checks the free space on the logical disk and the file attribute.
WinPE 3.1
- During or after loading the drive, you can specify network settings
General
- Directory names for USB/HDD boot are encoded from Ieshua to ILDU, cmdcons to CMDC
- Loaders for wim downloads are renamed from setupld to wimldr
- The name winpe.sif has been recoded to ILDUildu.
- Antivirus can react not only to viruses, but also to a lot of other programs.
- By default, LiveCD boots at 800x600x32bit screen resolution
- Network card support
- Support ATA/SATA/SCSI/RAID, USB 3.0 controllers
- Contains a PXE server, allowing computers to boot over the network using only one drive. There should not be a DHCP server in the network.
- The disc contains the following software products:
